Air & Water Hose

Agripak Fuel Hose Non Return Valve 10.00mm

Uses include fitting between lift pump & injector pump to stop fuel drain down, which will assist quick starting

Agripak Fuel Hose Non Return Valve 12mm

Uses include fitting between lift pump & injector pump to stop fuel drain down, which will assist quick starting

Agripak Fuel Hose Non Return Valve 6mm

Uses include fitting between lift pump & injector pump to stop fuel drain down, which will assist quick starting

Agripak Fuel Hose Non Return Valve 8mm

Uses include fitting between lift pump & injector pump to stop fuel drain down, which will assist quick starting

Air and Water Hose 6.4mm x 15mm x 10m

Hose ID: 6.4mm (1/4'')Hose OD: 15mm (9/16'')Hose Length: 10mWorking Pressure: 300psi (20 Bar) With 3:1 safety factor

Air and Water Hose 9.6mm x 19mm x 10m

Hose ID: 9.6mm (3/8'')Hose OD: 19mm (3/4'')Hose Length: 10mWorking Pressure: 300psi (20 Bar) With 3:1 safety factor

Compressor Hose

This hose can be used with any machine with an air supply or air brakes its supplied with a screw coupler at one end and snap on connector at the other alowing you to use it with a air line gauge to fill the tyres or connect an air blow gun to it to clean the radiator out etc. (Thread size for inlet fitting: 16mm)

Fuel Hose Non Return Valve To fit as: AL114276

Fuel Hose Non Return Valve To fit as: AL117189

Fuel Hose Non Return Valve

Fuel Hose Non Return Valve 8mm

Hand Primer with Non Return Valves, 10mm (Economy)

Hand Primer with Non Return Valves, 8mm (Economy)

Heater Hose 1/2'' x 10m

High strength polyester yarn - 2 ply (Length: 10m). I/D: 13mm (1/2'')-35° to +100°C

Heater Hose 3/4'' x 10m

High strength polyester yarn - 2 ply (Length: 10m). I/D: 19mm (3/4'') -35° to +100°C

Heater Hose 5/8'' x 10m

High strength polyester yarn - 2 ply (Length: 10m). I/D: 16mm (5/8'') -35° to +100°C