High Performance PTFE Lubricant (400ml Aerosol). Long lasting lubrication & corrosion protection. Dramatically reduces friction and wear. Drives out moisture. Safe on metal, rubber, wood, vinyl & most plastics.
Cockpit Shine Cleans, polishes and protects plastic, leather, wood and most synthetic materials. Suitable for interior and exterior use. Can be used on dashboards, PVC, plastic bumpers, side mirrors, spoilers and tyre walls.
Slip Plate The ONLY lubricant for dusty conditions. A graphite based dry lubricant which protects tools and equipment against dust and corrosion whilst lubricating. Can be used to lubricate winches, hoists, chains etc. Prevents chutes, trailer beds, blades and ploughs from gathering dirt, mud or grit.
Liquid Maintenance Expels moisture, particularly from wet electrical engine parts to aid easy starting. Penetrates and lubricates seized and rusted bolts, hinges, bearings, locks etc. 500ml aerosol
Belt dressing that improves performance on all types of belts used in industry. It quickly restores grip, prevents slippage, increases pulling power and extends the life of the belt. Prevents the belt drying out, hardening or glazing and stops belt squeaks. Exhibits excellent adhesion to the belt surface, preventing fling-off. Ideal for use on belts in humid or outdoor environments: protects against oxidation and moisture.
A powerful blend of non-chlorinated and dichloromethane free solvents, designed to remove most types of paints, surface coatings and worn gaskets eliminating excess scarping. The viscous gel formula clings to vertical surfaces, helping to prevent run-off. It is particularly suitable for aluminium or other soft metal flanges where scraping could lead to surface damage.Where to use:Removing paints varnishes and lacquers prior to refinishing, including 2-Pack, Acrylic, Cellulose, Vinyl, Alkyd and PolyurethaneRemoving worn gaskets from rocker box covers, water pumps, manifold etcRemoving charred oil residues from engine componentsRemoving rubber residues from wheel hubs prior to fitting new or repaired tyres
Holts Copper Grease has been developed to work at high temperatures, to prevent parts from seizing, making it ideal for use on vehicles and in trade applications.It protects against corrosion and can also be used between callipers and brake pads to prevent squeal.Protects against corrosion, preventing seized partsHigh performance non-melt lubricating greaseOperating temperatures: -100°C – +1100°CPrevents brake disc squealHolts Copper Grease can be used to stop seizing and prevent rust on areas such as wheel bolts, exhaust brackets, flanges and studs.
Metal-free ceramic grease to treat parts which are liable to heavy workload and/or which are exposed to very high temperatures. Product characteristics:Protects against electrolytic corrosion.High thermal stability.Prevents wear and sticking.Extremely suitable for mounting ABS and ASR brake systems and lambda sensors.The aerosol should have room temperature.Processing temperature 5 - 30°C.Shake before use.Apply the ceramic grease. The specific properties are achieved after evaporation of the solvent.
Protection against wear, stretching and corrosion. Fully synthetic, colorless grease with excellent lubricity at heavy loads (VKA value: 2.800N approx. 280kg). Thermally stable range: -40° C to 200°C. High penetration. Optimal adhesion. Splash water protection. Suited for O-, X- and Z-rings. Clean the chain and apply product. Allow 10 minutes before placing in service again.
Eliminates disruptions due to moisture in ignition and electrical systems.Product Properties:Efficient and durable cleaning power.Eliminates and displaces moisture.Efficient on steel, iron, light-alloy metal, and synthetic materials.Optimal penetration guarentees efficiencyThermally stable range: -50° C to +180° C.
Used for detection of leaks in gas and compressed air systems.Suitable for all gas installations and testing equipment.Reveals even tiny leaks in plastic and metal pipes.Thermally stable range: -15°C to 50°C.Neutral ph-value and compatible with all seals and materials used in installations.Not combustible.Does not react with gases or refrigerants.DVGW approval (the German regulation for gas installations) acc. to DIN EN 14291.Apply evenly.Clearly visible bubbles will form at leaks, cracks or porous areas.Rinse off with water afterwards.Do not apply horizontally!
Lubrication of moving parts subject to heavy loads such as pressure, impacts, and vibrations.Product properties:For lubrication of pulleys, sprockets, joints, gears, rollers, hinges, linkages, sliding disks, etc.Excellent penetration and corrosion protection.Extremely good lubricity - even at high pressure(VKA value acc. to DIN 51350: 2.400 N ) (approx. 529,11 lb).Excellent dry lubricity and emergency run properties due to the PTFE contents.Prevents and eliminates dragging parts, creaks and jarring noises.Fine durability against chemicals, sprays and sea water.Thermally stable range: +30° C to +250° C.Silicone-free and acid-free.
Universal disassembly, anti-friction, maintenance and lubricant spray for synthetics - and roller bearings, hinges, sliding bars, pulleys, electrical connections, etc.Product properties:Provides fine long term insulation on electrical connections.Seizing and water resistant.Efficient oxydation and corrosion protection.Prevents and eliminates jarring noises.Excellent lubrication and anti-friction agent.(VKA value acc. to DIN 51350: 1.000 N).Acid-free, does not solidify.Non-conductive. Colorless.Thermally stable range: -30° C to +200° C.
Universal lubricant for lubrication and corrosion protection of heavily loaded parts.Product properties:Lubricant and preservative for joints, gears, rollers, hinges, ball joints, linkages, sliding bars, etc.Lubricates also hard to reach places thanks to really good penetration.Good lubricity even at heavy load.(VKA value acc. to DIN 51350: 1.400 N ) (approx. 140 kg)Excellent adhesion - even on vertical surfacesEfficient protection against wear, corrosion, and oxidation.Excellent moisture and water restance.Thermally stable range: -40° C to +250° C.Silicone-free and acid-free.
Effective tool to loosen rusted or pressed connections.Product characteristics:Directed jet spray.Briefly lowers temperature to -50°C.The aerosol should have room temperature.Processing temperature 5 - 30°C.Spray the connection by repeatedly pressing the nozzle briefly. As a result of the fierce decrease in temperature, the connection can be loosed.
Specially developed for retractable seatbelt maintenance.Product properties:The product keeps retractable belts supple and freshens up their colours.The product doesn’t come off.Suitable as well for maintenance of rubber and plastic parts, and as antifriction compound on sliding parts such as rollers, machines, tools, conveyors, etc.Contains silicone.
Fast loosening of extremely rusty thread connections.Product properties:Penetrates rust, dissolves ground-in dirt, oil, etc. efficiently.Really excellent penetration.Works fast thanks to extreme down cooling to -40°C.Fast penetration of active agents via microscopical fissures in corrosion layers.Lubricity on account of PTFE contents (Teflon)Silicone-free and acid-free.Does not solidify.
Oil to prevent over-heating of metals in cutting and drilling activities.Product characteristics:Protects and lubricates the tool.Reduces wear of the tool.Non-corrosive.Silicone free.Shake before use.Before processing, spray the tool and the material generously. The tool and the material must remain moist during the activities.
Loosens and lubricates rust seized unions and connections.Product properties:Loosens and lubricates stuck corroding connections.Graphite content provides extra lubrication preventing seizure of screws, washers, and bolts at mountening and dismountening.Provides fine pressure resistant lube film (VKA value acc. to DIN 51350: 1,200 N).Displaces moisture and prevents jarring noises as well as slackness from wear and friction. Protects and maintains materials.Thermally stable range: -30° C to 450° C.Silicone-free, does not solidify.
Lubrication and maintenance of metal, synthetic and rubber parts.Product properties:Cleans, lubricates, maintains, waterproofs and preserves.Removes and prevents jarring noise.Odorless and colorless.Optimal penetration and good corrosion protection.Great water resistance prevents freezing.Thermally stable range: -30°C til +200°C.
Universal lubricant for mechanical parts of metal and plastic.Product characteristics:Prevents wear and sticking.Outstanding mechanical and thermal stability.Water-repellent.Very low friction factor.Shake before use.Optimum lubrication is obtained after evaporation of the solvent.
Loosens rusted and stuck threaded jointsProduct properties:Dissolves quickly rust seized connections and joints.Prevents and eliminates jarring noise thanks to fine lubricity.Protects against corrosion and wear.Good lubricity - even at heavy load.(VKA value acc. to DIN 51350: 1,200 N).Optimal lubricity in dry environments.Excellent penetration.Thermally stable range: -40°C to 450°C.Silicone-free.
Transparent spray to prevent damage to cables and wires.Product characteristics:Lasting protection.Resistant to weather influences and weak acids and bases.Odourless.The aerosol should have room temperature.Processing temperature 5 - 30°C.Shake before use.Apply in an equal layer on the surface to be protected.
For cleaning and degreasing brakes and other parts on vehicles.Product properties:Quick and efficient removal of brake and clutch dust, dirt, grease and oil.Dries quickly, total evaporation.Acetone-free, does not act on rubber, synthetic material or paint.Non-caustic.Silicone-free.
For cleaning of electric installations and components, plugs, relays, etc.Product properties:Quick and gentle removal of solidified switch grease, resin, oil and other dirt. ensures optimal contact, prevents leakage currents, and guarantees complete conduction.Evaporates totally.Caution: Do not apply to coils; may damage resin insulation.
Cleaning of machines, machine parts, engines, tools, etc.Product properties:Removes encrusted dirt, oil, and resin efficiently and gently.Well-suited for mobile and stationary cleaning stations, such as spray plants, brush cleaning, and ultrasonic equipment.Correctly applied, the product is harmless to gaskets, hoses, paint, and synthetic materials.Contains no organic halogens, AOX-free.Apply undiluted and allow to work; then either wipe off or rinse with pressure hose.
Cleans and maintains car interiors, synthetic parts and smooth leather.Product properties:Brightens faded synthetic materials and produces a silk matt finish.Antistatic and resistant to dust.Protects against fading and brittleness.Prolongs synthetic material durability.Removed greyish shine in car interior and from synthetic materials.Leaves a fresh fragrance. Contains silicone.Caution: Avoid application to pedals, rubber mats, steering wheel, seats, and controls.
Dissolves rust and rusty connectionsLubricates wearing partsMaintainsStops jarring soundsPrevents damp in distributors. etc.Protects against rust and corrosionDissolves dirtEfficient lock oilAcid- and silicone-free
For cleaning and brightening of car interiors.Product properties:Perfect for spot cleaning.High-efficient active cleaning ingredients quickly and thoroughly remove ground-in dirt, such as nicotine film, grease, and food remains.Well-suited for all washable surfaces, such as e.g. synthetic materials, textiles, smooth leather, glass, etc.Excellent stability, eminently suited for vertical surfaces.Gentle on the materials and environmentally safe.The active cleaning agents are biodegradable.Pleasant fresh citrus scent.
For interior and exterior cleaning of glass and all slippery surfaces.Product Features:Removes quickly and effortlessly dirt and organic residues, insect nugget, grease, oil, nicotine, etc.Glass foam is fast-acting.Does not attack rubber and plastic.Stri-free and environmentally friendly cleaning.Clean, care and protect in a workflow without cleaning.Reduces wiper blade wear.
The product is applied to the vehicle through the foam assembly in a blend of 1-10%.Let the product work for approx. 5 minutes after which the surface is thoroughly rinsed with hot water purifier (about 120-130 bar - 80 ° C).Finally, the vehicle is rinsed with a soft jet of water.
The product is applied to the vehicle through the foam assembly in a blend of 1-10%.Let the product work for approx. 5 minutes after which the surface is thoroughly rinsed with hot water purifier (about 120-130 bar - 80 ° C).Finally, the vehicle is rinsed with a soft jet of water.
Holts Electrical Contact Cleaner is specially formulated to quickly remove oil, grease and dirt, and restore electrical connectivity without causing damage.Powerful, quick drying degreaserCleans switches, components, contacts & relaysLeaves no residue360° sprayAuto electronics and electrical parts like ignition components can become dirty and corroded over time through exposure to the elements.Holts Electrical Contact Cleaner has a powerful cleaning action, is quick to dry and leaves no sticky or oily residue.It is easy to use without removing any parts thanks to its ability to spray at all angles, including upside down.
LOCTITE® LB 8008 C5-A is an exclusive anti-seize lubricant in a brush top form with copper and graphite suspended in high quality grease. It has an NLGI Grade of 0.LOCTITE® LB 8008 C5-A anti-seize lubricant paste is packaged in a brush top can, with copper and graphite suspended in a high quality grease. Applications include screws, nuts, pipes, exhaust bolts and brake caliper bolts. Resistant to extremely high temperatures (up to +980°C) and protects from rust, corrosion, galling and seizing. It has an NLGI Grade of 0.Resistant to very high temperatures up to +980°CUnique brush topIt has an NLGI grade of 0Protects from rust, corrosion, galling and seizingUsed for screws, nuts, pipes, exhaust bolts and brake calliper bolts
Lubricant - emergency repair. Shock freezing (-40°C). Releases rusted, corroded and seized components. Wicks directly into the rust by capillary action.LOCTITE® LB 8040 is a special mineral oil designed to free rusted, corroded and seized parts. The shock-freezing effect will cool parts instantly down to -43°C and cause microscopic cracks in the layer of rust. This allows the lubricating ingredients to wick directly into the rust by capillary action. The product leaves a thin film on the released parts that lubricates and prevents rust.Universal applicationHighly resistant to micro-organisms, bacteria and fungiBactericide-freeExcellent cooling and lubrication performanceLow foaming