Front:3'' LCD Screen with touch buttons.126° Wide FOV & F1.6 Bright Lens.Wide Quad HD Recording (2560x1440).2 Channels recording.3.7M Pixels.Built in 3-Axis G-Sensor.Bulit in GPS receiver.Compatible with Smartphone App & PC Application.Supplied with adhesive and Suction cup mounts.Built in super capacitor.Built in Polarised Filter.Magnetic quick release Mounts.Rear:161° Wide FOV & F2 Bright Lens.180° Angle Adjustment.Full HD Recording (1920x1080).3M Adhesive Mount.Resolution: Wide Quad HD (2560 x 1440), Full HD (1920 x 1080)Frame rate: 30 FPSAudioPhoto modeFits SD card size: 16GBNight visionContains: Dashboard Camera (Front & Rear), Magnetic mounting bracket with Suction cup and Adhesive option, USB charging cable, 12V auxiliary charge cable, stick on cable clips. 16GB Micro SD Card.SD card supplied: Yes
What is it?DAB splitter. No need for any other DAB antenna, simple and easy to fit. Why do I fit it? Unfortunately, your conventional FM antenna will not pick up a DAB signal. So you have a few options. Replace the existing antenna (costly and time consuming to fit), glass mount (tricky to fit in cabs with multiple opening windows), magnet antenna (magnet stuck on roof, risk of failing off, and reception not great). What Kenwood have come up with: utilising the existing FM antenna, we split the signal and produce clear crisp sweet sounding DAB! Simply FM in DAB and FM out. How do I fit it?At point of fitting the radio, the splitter is connected between the existing antenna and the new radio. You will need to connect the blue wire on the splitter to the blue wire on the Kenwood loom. This solution should only take you around 2 mins to fit too!. Simple!
136°Wide FOV & F1.8 Bright Lens.2.7''LCD Screen.Full HD Recording (2.0M: 1920 x 1080).Built in 3 Axis G-Sensor.Built in GPS receiver.2-way Dashcam Mount (Suction Cup/Adhesive).Magnetic Quick Release.Compatible with PC application.Built in Super Capacitor.
2.7'' LCD Screen.136° Wide FOV & F1.8 Bright Lens.Full HD Recording (1920x1080).2.0M Pixels.Built in 3-Axis G-Sensor.Bulit in GPS receiver.Compatible with Smartphone App & PC Application.Magnetic quick release Mount.Supplied with Suction cup mount and adhesive version replacement.Built in super capacitor.Supplied with 1.6GB micro SD Card.Supplied with USB & 12V auxiliary charging cables.
125°Wide FOV & F2.4 Bright Lens.2'' LCD Screen.HD Recording (1.0M: 1280 x 720).Built in 3 Axis G-Sensor.2-way Dashcam Mount (Suction Cup/Adhesive).Compatible with PC application.Built in Super Capacitor.Supplied with 16GB Micro SD Card.Supplied with USB & 12V Auxillary socket leads.
Short body media receiverConformal Coating for improved moisture resistanceDAB+ Digital radio MP3/WMA/AAC/WAV/FLAC playbackKENWOOD Remote & Music Mix app ready13 digits, 1,5 Line Wide LCD DisplayVariable Colour Illumination2 RCA (front + rear/sub) Preouts (2,5V)DAB antenna (S.150453 or S.150455) will be required if replacing an FM stereo
With built in Amazon AlexaShort BodyWith Audio receivers shorter in depth, installation is made easier in a wider range of vehicles than ever before.Spotify App ReadyControl content from the Spotify App on iPhone and Android devices as a dedicated source on the receiver. Listeners can play and skip tracks, browse playlists, albums and radio stations via the KENWOOD receiver touch screen. Spotify works over Bluetooth for Android devices and Bluetooth or USB cable for iPhone. 2 Phones Full-Time ConnectionAllows two phones to be connected for hands-free operation at any time. Easily switch between both phones with the touch of a button. Answering, calling or searching your phonebook on your phone is made simple through an intuitive display.Kenwood Remote AppThe Remote app can control most basic functions of the receiver, as well as finer sound tuning settings, over the Bluetooth connection of the paired phone (iPhone or Android).Android Rapid ChargeRapidly charge your compatible Android smartphone with the USB port, up to a maximum of 1.5A.HFP 1.6 for Bluetooth Hands-free CallingThanks to HFP 1.6 support for our Bluetooth models, clear & real sounding voice by ''Wideband Speech'' is available through hands-free conversation via Bluetooth. * Availability of HFP 1.6 (Wideband Speech) depends on the phone and service provider.Wireless Music Browsing (AVRCP 1.5)Search and select songs from your music collection using a Bluetooth® connection.DAB / DAB+DAB is a digital radio technology for broadcasting radio stations. In comparison to traditional AM and FM radios, DAB delivers cleaner, crisper sound due to the noise reduction implemented. Furthermore an upgraded DAB+ was released in 2007, which features a higher audio quality and better reception. KENWOOD’s built-in DAB+ receivers are maximised in design quality, top-end performance and affordability.Android Music Playback (AOA2)Supporting AOA2, install the KENWOOD Music Play app and connect your smartphone to the receiver via USB, and control your music directly from the car monitor receiver.Supplied with DAB SplitterWhat is it?DAB splitter included. No need for any other DAB antenna, simple and easy to fitWhy do I fit it?Unfortunately, your conventional FM antenna will not pick up a DAB signal. So you have a few options. Replace the existing antenna (costly and time consuming to fit), Glass mount (tricky to fit in cabs with multiple opening windows.) Magnet antenna (magnet stuck on roof, risk of failing off, and reception not great) what Kenwood have come up with: utilising the existing FM antenna, we split the signal and produce clear crisp sweet sounding DAB! Simply FM in DAB and FM out.How do I fit it?At point of fitting the radio this goes in line. You will need to connect the blue wire on the splitter to the blue wire on the Kenwood loom. Simply. This solution should only take you around 2 mins to fit too!(This product is designed to fit an unamplified FM/AM antenna).DAB antenna (S.150453 or S.150455) will be required if replacing an FM stereo
With Built in Amazon AlexaShort BodyWith Audio receivers shorter in depth, installation is made easier in a wider range of vehicles than ever before. Spotify App ReadyControl content from the Spotify App on iPhone and Android devices as a dedicated source on the receiver. Listeners can play and skip tracks, browse playlists, albums and radio stations via the KENWOOD receiver touch screen. Spotify works over Bluetooth for Android devices and Bluetooth or USB cable for iPhone. 2 Phones Full-Time ConnectionAllows two phones to be connected for hands-free operation at any time. Easily switch between both phones with the touch of a button. Answering, calling or searching your phonebook on your phone is made simple through an intuitive display.2 Phones Full-Time ConnectionAllows two phones to be connected for hands-free operation at any time. Easily switch between both phones with the touch of a button. Answering, calling or searching your phonebook on your phone is made simple through an intuitive display.Kenwood Remote AppThe Remote app can control most basic functions of the receiver, as well as finer sound tuning settings, over the Bluetooth connection of the paired phone (iPhone or Android).Android Rapid ChargeRapidly charge your compatible Android smartphone with the USB port, up to a maximum of 1.5A.HFP 1.6 for Bluetooth Hands-free CallingThanks to HFP 1.6 support for our Bluetooth models, clear & real sounding voice by ''Wideband Speech'' is available through hands-free conversation via Bluetooth. * Availability of HFP 1.6 (Wideband Speech) depends on the phone and service provider.Wireless Music Browsing (AVRCP 1.5)Search and select songs from your music collection using a Bluetooth® connection.DAB / DAB+ DAB is a digital radio technology for broadcasting radio stations. In comparison to traditional AM and FM radios, DAB delivers cleaner, crisper sound due to the noise reduction implemented. Furthermore an upgraded DAB+ was released in 2007, which features a higher audio quality and better reception. KENWOOD’s built-in DAB+ receivers are maximised in design quality, top-end performance and affordabilityAndroid Music Playback (AOA2)Supporting AOA2, install the KENWOOD Music Play app and connect your smartphone to the receiver via USB, and control your music directly from the car monitor receiver.DAB splitter not included.DAB antenna (S.150453 or S.150455) will be required if replacing an FM stereo
Built in Amazon AlexaDAB+/FM/AM radio Bluetooth hands-free & audio streaming 2 Phones fulltime connection Kenwood Music Mix - 5 phones can connect for music streaming 2 x Rear USB inputsPhone-iPod music playback via Bluetooth or connectionKenwood Remote App for easy set up - IOSVariable key illumination to match vehicles dashboard CD dust cover DAB aerial splitter not includedDAB antenna (S.150453 or S.150455) will be required if replacing an FM stereo
White Display & Red Key Illumination13 Digits Vertical Alignment LCD3 Band Parametric EqualizerFront AUX input & Illuminated USB with dust coverAndroid Music Playback1A Charge for SmartphoneLess than 1mA Dark Current Consumption
DAB+/FM/AM radioBluetooth hands-free & audio streaming2 Phones fulltime connectionKenwood Music Mix - 5 phones can connect for music streamingSpotify App direct control2 x Rear USB inputsPhone-iPod music playback via Bluetooth or connectionAndroid music playback via Bluetooth or connectionKenwood Remote App for easy set up - IOS & AndroidVariable key illumination to match vehicles dashboardCD dust coverDAB aerial splitter includedDAB antenna (S.150453 or S.150455) will be required if replacing an FM stereo
Short Body.Designed for ease of use.Direct audio control button allows you to access the sound tuning menu quickly.Vertical Alignment LCD display secures higher visibility during day-time drive.Hi-Quality Sound3-Band EQAuto EQ Sync with Volume Level
