The CARRYTANK® 220 pick-up, an evolution of our CARRYTANK® 220, is a transportable diesel fuel tank made from roto-molded linear polyethylene.The 220 pickup tank can be placed inside the body of a pickup vehicle and remain below the height of the side boards, allowing the installation of the most common closures for bodies. Drawing on its considerable experience, ES has also optimized the dimensions of the tank for international transport.It comes with a reinforced padlockable lid, reinforced closures and for fitting the most common filtering systems. It also comes with:aluminum filling plugsafety valvetransfer unitforklift pockets for liftinghandles for lifting when emptyrecesses for securing straps to the support baselevel indicatorinserts made of aluminum or diesel fuel-compatible material.Width: 805mm, Length: 1155mm, Height: 450mmFlow Rate: 40L/minCable length
Electric Pump 12V DC, automatic nozzle, 4m hose, level indicator, in-line filter, filling plug (2'') with integrated air vent valve on both compartments & Covering Lid made in ABS, designed and manufactured to provide protection against bad weather conditions, UV rays and equipped with lockable draw latches. Purposely designed to fit over the wheel arches of a pickup truck.Width: 800mm, Length: 1200mm, Height: 830mmFlow Rate: 40L/minCable length: 4M
The innovation of Carrytank™ 900+100 is ''hidden” inside: two combined tanks (diesel fuel and AdBlue™/DEF) designed and tested to resist the pressure created by the maximum volume of fuel contained. Since it is a tank intended for the transport, the design research has also focused on logistics, with the aim of making its handling faster and more efficient. For this reason, the tank, in addition to the forklift pockets, is also equipped with 4 lifting lugs for lifting tank at full load from above, ensuring full stack-ability during the storage.CARRYTANK™ 900+100The new polyethylene tank from Emiliana Serbatoi for the combined transport of diesel fuel (900 litres) and AdBlue™/DEF (100 litres) with a lockable lid.Carrytank™ 900+100 is the most performing tank available on the market, made in polyethylene, aimed at storing and transporting up to 900 litres of diesel fuel and 100 litres of AdBlue™/DEF in the same container.Drop testVibration testHydraulic pressure testPneumatic pressure testFull load lifting testStack-ability test at full load
Tank specially designed for AdBlue.Its design has been subjected to numerous resistance tests in order to guarantee safe transport.The design of the tank allows easy handling:Handling by forklift thanks to spaces dedicated to pallet forks.Easy storage and transport at full load: possibility of stacking several tanks thanks to the centering pins located at the ends of the tankDimensions : 912 x 601mmHeight: 622mmWidth: 601mm, Length: 912mm, Height: 622mmFlow Rate: 40L minSupplied with: Electric pump 12V DC, manual nozzle & 4m EPDM hose.Cable length: 4MLockable lid available on request
Width: 800mm, Length: 1200mm, Height: 785mmFlow Rate: 40L minSupplied with: Electric Pump 12V DC, automatic nozzle, 4m hose, level indicator, in-line filter, filling plug (2'') with integrated air vent valve on both compartments & Covering Lid made in ABS, designed and manufactured to provide protection against bad weather conditions, UV rays and equipped with lockable draw latches.Cable length: 4M
Width: 1200mm, Length: 800mm, Height: 785mmFlow Rate: 60L minSupplied with: Electric Pump 12V DC, automatic nozzle, 8m hose, level indicator, in-line filter, filling plug (2'') with integrated air vent valve on both compartments & Covering Lid made in ABS, designed and manufactured to provide protection against bad weather conditions, UV rays and equipped with lockable draw latches.Cable length: 8M
This tank has two tanks in one, to facilitate refueling.Its design has been subjected to numerous resistance tests in order to guarantee safe transport.The design of the tank allows easy handling:Handling by forklift thanks to spaces dedicated to pallet forks.Easy storage and transport at full load: possibility of stacking several tanks thanks to the centering pins located at the ends of the tank.Dimensions to the standards of a European pallet in order to facilitate transport.Dimensions : 1200 x 800mmHeight: 785mmWidth: 800mm, Length: 1200mm, Height: 785mmFlow Rate: 40 L/min (Diesel), 15 L/min (AdBlue)L minSupplied with: Diesel: Electric Pump 12V DC, automatic nozzle, 4m hose, level indicator, in-line filter & filling plug (2'') with integrated air vent valve on both compartments.AdBlue: Submersible pump 12V DC, manual nozzle & 4m EPDM hose.Covering Lid made in ABS, designed and manufactured to provide protection against bad weather conditions, UV rays and equipped with lockable draw latchesCable length: 4M
Width: 995mm, Length: 1830mm, Height: 1000mmFlow Rate: 40L minSupplied with: IBC Polyethylene Tank for diesel fuel transportation with transparency to allow a constant sight monitoring of the fuel level. It can be easily washed with regular detergents thanks to its highly smooth surface. Side holes reinforced with zinc-coated carbon steel profiles allow lifting with a forklift (full load). Automatic Nozzle. 220mm diameter top hatch with lockable screw lid, gasket and air vent device. Stackable, ADR Compliant and UN marked. Digital Flow Meter to be ordered separately if required.Cable length: 4M
The Meclube mobile oil drain cart is ideal for draining large amounts of fluids and has inbuilt baffles to prevent spillage. The oil can then be transferred with the inbuilt air operated pump which is suitable for Engine, Transmission and Differential oils. Also features a grate which can filter large debris and can also be used to drain filters.Equipped with:Air-operated oil pump ratio=1:1Breakwater grate on the base of the tankBreakwater grate for drip the substituted oil filters2 swiveling wheels Ø180mm2 fixed wheels Ø180mmF 3/4'' G exhaust ball valveFemale quick disconnect coupling 3/4''GMale quick disconnect coupling 3/4''GDimensions: 1800mm x 1100mm x 350mm
The Sparex Drum Level Indicator is suitable for checking balance fluid remaining in a drum or tank. This cost-effective tool easily fits onto the small 3/4'' hole on drums, leaving the 2'' opening free for installing pumps. The planetary gear mechanism float connected to a string and moves down as the liquid level goes down in the drum. The float is partially filled with water, and changing the water amount allows the same unit to be used with liquids of different viscosities. The float can be used with various liquids, including oil, fuel, water, coolants, and more, with its polyethylene construction. (Not suitable for Ethanol use)
High density polyethylene drain pan with a closed design for safe and spill free disposal. Designed for large capacity oil and antifreeze changes with its large 8” (200mm) opening. The opening includes a catch basket, which can hold small parts and filters. Integrated handle and wheels for easy carrying, handling and slosh free mobility.
Covering Lid made in ABS, designed and manufactured to provide protection against bad weather conditions, UV rays and equipped with lockable draw latches.
