TEROSON® PU 8519 P is an all-in-one glass primer and activator to be used prior to windscreen bonding. It promotes adhesion and UV protection of direct glazing adhesives / sealants.Used for application on glass, paint, ceramics and encapsulated screens. Re-activating of existing, cut back direct glazing material possible. Use TEROSON® ET PRIMER APPLS to apply a uniform layer of the product. Surface preparation with TEROSON® VR 20 recommended. Evaporation time: approx. 2 min., even in cold environment; for 2-component direct glazing products: 15 min. Excellent UV protection Adhesion promotion Activation of cut beads (after more than 2 h open) Corrosion preventionView Product Specifications
TEROSON® PU 8519 P is an all-in-one glass primer and activator to be used prior to windscreen bonding. It promotes adhesion and UV protection of direct glazing adhesives / sealants.Used for application on glass, paint, ceramics and encapsulated screens. Re-activating of existing, cut back direct glazing material possible. Use TEROSON® ET PRIMER APPLS to apply a uniform layer of the product. Surface preparation with TEROSON® VR 20 recommended. Evaporation time: approx. 2 min., even in cold environment; for 2-component direct glazing products: 15 min. Excellent UV protection Adhesion promotion Activation of cut beads (after more than 2 h open) Corrosion prevention
LOCTITE
Alternative to
TEROSON 8519 - Activateur/primaire - 10mlS.147778https://75025d40dd58ab042ef4-3509ef0b9210fbf84c18b36ced24de7a.ssl.cf3.rackcdn.com/imagelibrary_sml/147778_pic1.jpgTEROSONPréparation de surface ? primaire/activateur tout-en-un pour favoriser l?adhérence de l'adhésif/du joint sur vitrage.
Le TEROSON? PU 8519 P est un primaire et activateur tout-en-un à utiliser avant le collage du pare-brise. Il favorise l'adhérence et la protection UV des adhésifs / joints pour vitrage. Utilisé pour l'application sur verre, peintures, céramiques et pare-brise. Réactivation possible sur les cordons résiduels arasés. Utiliser le tampon TEROSON? ET PRIMER APPL ou TEROSON? ET APPLICATOR pour appliquer une couche uniforme de produit. Il est recommandé de préparer la surface avec le TEROSON? VR 20. Temps d?évaporation : env. 2 min même en environnement froid ; pour les colles vitrage bicomposant : attendre 15 min Excellente protection UV Favorise l'adhérence Réactivation des cordons résiduels (si non recollés depuis plus de 2 heures) Protection contre la corrosionS.147778
Barcode 128
S.153391
Barcode EAN13
5045161533917
Brand
LOCTITE
Related products
TEROSON PU 8597 HMLC Glazing adhesiveS.19281https://75025d40dd58ab042ef4-3509ef0b9210fbf84c18b36ced24de7a.ssl.cf3.rackcdn.com/imagelibrary_sml/19281_pic1.jpgLOCTITEBody Repair – Direct glazing adhesive, 1-component polyurethane. Safe drive-away time of 1 hour acc. to FMVSS and 4 hours acc. to European crash test standard. TEROSON® PU 8597 HMLC is a 1-component direct glazing adhesive used for windscreen replacement where a solid safety guarantee is required. The tested safe drive-away time is 1 hour according to the US norm FMVSS and 4 hours according to the most stringent European crash test standard. Best application results are achieved with the TEROSON® Powerline II compressed air gun. Bondline preparation with TEROSON® VR 100 and TEROSON® ET sponge prior to primer application recommended. High European safety standard HMLC high modulus, low conductivity Good sag resistance TÜV approved product No stringing OEM specifiedS.19281
Tariff Code
3208909900
Suitable For Make/Model
Suitable For Make/Model
This product is not associated with any particular make or model
OEM Part Numbers
OEM Part Numbers
This product is not associated with any particular OEM part number
Catalogue Pages
Catalogue Pages
This product does not appear in any Sparex printed catalogues
