Submersible Pump (12V) 1/2''

Specifications

Connect a hose to the outlet nozzle and immerse the complete pump in liquid.
Connect the battery clips to the battery terminals (+) positive to (+) positive and (-) negative to (-) negative (if powering from a vehicle battery do not use with the engine running).
The pump will deliver immediately.
For an in-line installation unclip the filter to expose the inlet nozzle, connect length of hose between the tank and nozzle. The pump must be fitted below the tank.
Avoid dry running for long periods.
For drinking water applications sterilise regularly.
Store away from excessive heat and direct sunlight to avoid external damage.
If the pump fails to perform, check for blockages (including filters), leaks and correct hose & electrical connections.
Pumps fresh and sea water.
Rapid diesel refuelling and transfer with no spillage (NOT suitable for Petrol).
Bilge pump-out in tight areas.
Water Transfer; Deck showers; Deck, Anchor & general Wash-down.
Robust, slim line with clip-on easily cleaned filter.

Amps

4.5

Barcode 128

S.14830

Barcode EAN13

5023495148304

Body

POM

Brand

Sparex

Cable length (ft)

13

Cable length (M)

4

Current

12V (4.5Amps)

Duty

Continuous Duty - Should not be run for long periods of time.

Flow rate (LPM)

18

Flow rate gallons per minute

4

Hose inner Ø (ins)

1/2

Hose inner Ø (mm)

13

Length (ins)

6-1/2

Length (mm)

165

Notes

Connect a hose to the outlet nozzle and immerse the complete pump in liquid. Connect the battery clips to the battery terminals (+) positive to (+) positive and (-) negative to (-) negative (if powering from a vehicle battery do not use with the engine running). The pump will deliver immediately. For an in-line installation unclip the filter to expose the inlet nozzle, connect length of hose between the tank and nozzle. The pump must be fitted below the tank. Avoid dry running for long periods. For drinking water applications sterilise regularly. Store away from excessive heat and direct sunlight to avoid external damage. If the pump fails to perform, check for blockages (including filters), leaks and correct hose & electrical connections.

Outlet ins

1/2

Pressure (bar)

0.96 bar

Pressure (psi)

16psi

Pumping Height (M)

9.7

Pump type

Centrifugal submersible and in-line pump

Suitable For Make/Model

This product is not associated with any particular make or model

OEM Part Numbers

This product is not associated with any particular OEM part number

Catalogue Pages

Catalogue

Page No.

S.74000 Accessories 2014

171