Universal - for lifting in any directionWelded alloy steel body for strength and smaller size. Forged alloy components, where requiredIndividually Proof Tested to 2 times the Working Load Limit with certificationWorking Load Limit and jaw opening permanently stamped on bodyEach product is individually serialized, with the serial number and Proof Load test date stamped on body. User manual with test certificate is included with each clampIP10 - Standard clamp for materials with a surface hardness to 363HV10 (345 HB)Full 180° turning range for material transfer, turning or movingLock open, lock closed ability with latch for pretension on material and then release of materialFor use with materials with a surface hardness to 279HV10. Only 5% minimum WLL is neededMaintenance and repair kits are availableManufactured by an ISO 9001 facilityAll sizes are RFID EQUIPPEDMinimum WLL is 5% of maximum WLL for .5t IP10 onlyMinimum WLL is 10% of maximum WLL all other IP10, IP10J, IP10S, IP10H clamps.
Capacities 1/3 through 150 metric tons.WLL and grade '6' permanently shown on every shackle.Forged - Quenched and Tempered, with alloy bolts.Hot Dip Galvanized or self coloured.Fatigue rated (1/3t to 55t)Shackles 25t and larger are RFID equipped.Shackles 85t and larger are proof tested to 2x WLL.Approved for use at -40° C (-40° F) to 204° C (400°F)Meets or exceeds all requirements of ASME B30.26Look for the Red Pin® . . . the mark of genuine Crosby quality.
Capacities 1/3 through 150 metric tons.WLL and grade '6' permanently shown on every shackle.Forged - Quenched and Tempered, with alloy bolts.Hot Dip Galvanized or self coloured.Fatigue rated (1/3t to 55t)Shackles 25t and larger are RFID equipped.Shackles 85t and larger are proof tested to 2x WLL.Approved for use at -40° C (-40° F) to 204° C (400°F)Meets or exceeds all requirements of ASME B30.26Look for the Red Pin® . . . the mark of genuine Crosby quality.
Capacities 1/3 through 150 metric tons.WLL and grade '6' permanently shown on every shackle.Forged - Quenched and Tempered, with alloy bolts.Hot Dip Galvanized or self coloured.Fatigue rated (1/3t to 55t)Shackles 25t and larger are RFID equipped.Shackles 85t and larger are proof tested to 2x WLL.Approved for use at -40° C (-40° F) to 204° C (400°F)Meets or exceeds all requirements of ASME B30.26Look for the Red Pin® . . . the mark of genuine Crosby quality.
Capacities 1/3 through 150 metric tons.WLL and grade '6' permanently shown on every shackle.Forged - Quenched and Tempered, with alloy bolts.Hot Dip Galvanized or self coloured.Fatigue rated (1/3t to 55t)Shackles 25t and larger are RFID equipped.Shackles 85t and larger are proof tested to 2x WLL.Approved for use at -40° C (-40° F) to 204° C (400°F)Meets or exceeds all requirements of ASME B30.26Look for the Red Pin® . . . the mark of genuine Crosby quality.
Capacities 1/3 through 150 metric tons.WLL and grade '6' permanently shown on every shackle.Forged - Quenched and Tempered, with alloy bolts.Hot Dip Galvanized or self coloured.Fatigue rated (1/3t to 55t)Shackles 25t and larger are RFID equipped.Shackles 85t and larger are proof tested to 2x WLL.Approved for use at -40° C (-40° F) to 204° C (400°F)Meets or exceeds all requirements of ASME B30.26Look for the Red Pin® . . . the mark of genuine Crosby quality.
Capacities 1/3 through 150 metric tons.WLL and grade ''6'' permanently shown on every shackle.Forged - Quenched and Tempered, with alloy bolts.Hot Dip Galvanized or self coloured.Fatigue rated (1/3t to 55t)Shackles 25t and larger are RFID equipped.Shackles 85t and larger are proof tested to 2x WLL.Approved for use at -40° C (-40° F) to 204° C (400°F)Meets or exceeds all requirements of ASME B30.26
Capacities 1/3 through 150 metric tons.WLL and grade ''6'' permanently shown on every shackle.Forged - Quenched and Tempered, with alloy bolts.Hot Dip Galvanized or self coloured.Fatigue rated (1/3t to 55t)Shackles 25t and larger are RFID equipped.Shackles 85t and larger are proof tested to 2x WLL.Approved for use at -40° C (-40° F) to 204° C (400°F)Meets or exceeds all requirements of ASME B30.26
Capacities 1/3 through 150 metric tons.WLL and grade ''6'' permanently shown on every shackle.Forged - Quenched and Tempered, with alloy bolts.Hot Dip Galvanized or self coloured.Fatigue rated (1/3t to 55t)Shackles 25t and larger are RFID equipped.Shackles 85t and larger are proof tested to 2x WLL.Approved for use at -40° C (-40° F) to 204° C (400°F)Meets or exceeds all requirements of ASME B30.26
Capacities 1/3 through 150 metric tons.WLL and grade ''6'' permanently shown on every shackle.Forged - Quenched and Tempered, with alloy bolts.Hot Dip Galvanized or self coloured.Fatigue rated (1/3t to 55t)Shackles 25t and larger are RFID equipped.Shackles 85t and larger are proof tested to 2x WLL.Approved for use at -40° C (-40° F) to 204° C (400°F)Meets or exceeds all requirements of ASME B30.26
Capacities 1/3 through 150 metric tons.WLL and grade ''6'' permanently shown on every shackle.Forged - Quenched and Tempered, with alloy bolts.Hot Dip Galvanized or self coloured.Fatigue rated (1/3t to 55t)Shackles 25t and larger are RFID equipped.Shackles 85t and larger are proof tested to 2x WLL.Approved for use at -40° C (-40° F) to 204° C (400°F)Meets or exceeds all requirements of ASME B30.26
Capacities 1/3 through 150 metric tons.WLL and grade ''6'' permanently shown on every shackle.Forged - Quenched and Tempered, with alloy bolts.Hot Dip Galvanized or self coloured.Fatigue rated (1/3t to 55t)Shackles 25t and larger are RFID equipped.Shackles 85t and larger are proof tested to 2x WLL.Approved for use at -40° C (-40° F) to 204° C (400°F)Meets or exceeds all requirements of ASME B30.26
Capacities 1/3 through 150 metric tons.WLL and grade ''6'' permanently shown on every shackle.Forged - Quenched and Tempered, with alloy bolts.Hot Dip Galvanized or self coloured.Fatigue rated (1/3t to 55t)Shackles 25t and larger are RFID equipped.Shackles 85t and larger are proof tested to 2x WLL.Approved for use at -40° C (-40° F) to 204° C (400°F)Meets or exceeds all requirements of ASME B30.26
Capacities 1/3 through 150 metric tons.WLL and grade ''6'' permanently shown on every shackle.Forged - Quenched and Tempered, with alloy bolts.Hot Dip Galvanized or self coloured.Fatigue rated (1/3t to 55t)Shackles 25t and larger are RFID equipped.Shackles 85t and larger are proof tested to 2x WLL.Approved for use at -40° C (-40° F) to 204° C (400°F)Meets or exceeds all requirements of ASME B30.26
Capacities 1/3 through 150 metric tons.WLL and grade ''6'' permanently shown on every shackle.Forged - Quenched and Tempered, with alloy bolts.Hot Dip Galvanized or self coloured.Fatigue rated (1/3t to 55t)Shackles 25t and larger are RFID equipped.Shackles 85t and larger are proof tested to 2x WLL.Approved for use at -40° C (-40° F) to 204° C (400°F)Meets or exceeds all requirements of ASME B30.26
Capacities 1/2 to 85 metric tons, grade 6Working Load Limit and grade '6' permanently shown on every shackleForged — Quenched and Tempered, with alloy pinsHot Dip galvanized or self coloured. (85, 120, and 150 metric ton shackles are all hot dip galvanized bows and the bolts are Dimetcoted® and painted red)Sizes 3/8'' and below are mechanically galvanizedFatigue rated (1/2t - 55t)Shackles 25t and larger are RFID EQUIPPEDApproved for use at -40° C (-40 degrees F) to 204° C (400° F)Meets or exceeds all requirements of ASME B30.26Sizes 1/2 - 25t meet the performance requirements of EN13889:2003Shackles 55 metric tons and smaller can be furnished proof tested with certificate to designated standards, such as ABS, DNV, Lloyds, or other certification when requested at time of orderType Approval certification in accordance with ABS 2016 Steel Vessel Rules and 2016 ABS Guide for Certification of Lifting Appliance available. Certificates available when requested at time of order and may include additional chargesAll 2150 shackles can meet charpy requirements of 42 Joules (31 ft/lbf) avg at -20° C (-4° F) upon special requestLook for the Red Pin® . . . the mark of genuine Crosby quality.
Capacities 1/2 to 85 metric tons, grade 6Working Load Limit and grade '6' permanently shown on every shackleForged — Quenched and Tempered, with alloy pinsHot Dip galvanized or self coloured. (85, 120, and 150 metric ton shackles are all hot dip galvanized bows and the bolts are Dimetcoted® and painted red)Sizes 3/8'' and below are mechanically galvanizedFatigue rated (1/2t - 55t)Shackles 25t and larger are RFID EQUIPPEDApproved for use at -40° C (-40 degrees F) to 204° C (400° F)Meets or exceeds all requirements of ASME B30.26Sizes 1/2 - 25t meet the performance requirements of EN13889:2003Shackles 55 metric tons and smaller can be furnished proof tested with certificate to designated standards, such as ABS, DNV, Lloyds, or other certification when requested at time of orderType Approval certification in accordance with ABS 2016 Steel Vessel Rules and 2016 ABS Guide for Certification of Lifting Appliance available. Certificates available when requested at time of order and may include additional chargesAll 2150 shackles can meet charpy requirements of 42 Joules (31 ft/lbf) avg at -20° C (-4° F) upon special requestLook for the Red Pin® . . . the mark of genuine Crosby quality.
Capacities 1/2 to 85 metric tons, grade 6Working Load Limit and grade '6' permanently shown on every shackleForged — Quenched and Tempered, with alloy pinsHot Dip galvanized or self coloured. (85, 120, and 150 metric ton shackles are all hot dip galvanized bows and the bolts are Dimetcoted® and painted red)Sizes 3/8'' and below are mechanically galvanizedFatigue rated (1/2t - 55t)Shackles 25t and larger are RFID EQUIPPEDApproved for use at -40° C (-40 degrees F) to 204° C (400° F)Meets or exceeds all requirements of ASME B30.26Sizes 1/2 - 25t meet the performance requirements of EN13889:2003Shackles 55 metric tons and smaller can be furnished proof tested with certificate to designated standards, such as ABS, DNV, Lloyds, or other certification when requested at time of orderType Approval certification in accordance with ABS 2016 Steel Vessel Rules and 2016 ABS Guide for Certification of Lifting Appliance available. Certificates available when requested at time of order and may include additional chargesAll 2150 shackles can meet charpy requirements of 42 Joules (31 ft/lbf) avg at -20° C (-4° F) upon special requestLook for the Red Pin® . . . the mark of genuine Crosby quality.
Capacities 1/2 to 85 metric tons, grade 6Working Load Limit and grade '6' permanently shown on every shackleForged — Quenched and Tempered, with alloy pinsHot Dip galvanized or self coloured. (85, 120, and 150 metric ton shackles are all hot dip galvanized bows and the bolts are Dimetcoted® and painted red)Sizes 3/8'' and below are mechanically galvanizedFatigue rated (1/2t - 55t)Shackles 25t and larger are RFID EQUIPPEDApproved for use at -40° C (-40 degrees F) to 204° C (400° F)Meets or exceeds all requirements of ASME B30.26Sizes 1/2 - 25t meet the performance requirements of EN13889:2003Shackles 55 metric tons and smaller can be furnished proof tested with certificate to designated standards, such as ABS, DNV, Lloyds, or other certification when requested at time of orderType Approval certification in accordance with ABS 2016 Steel Vessel Rules and 2016 ABS Guide for Certification of Lifting Appliance available. Certificates available when requested at time of order and may include additional chargesAll 2150 shackles can meet charpy requirements of 42 Joules (31 ft/lbf) avg at -20° C (-4° F) upon special requestLook for the Red Pin® . . . the mark of genuine Crosby quality.
Capacities 1/2 to 85 metric tons, grade 6Working Load Limit and grade '6' permanently shown on every shackleForged — Quenched and Tempered, with alloy pinsHot Dip galvanized or self coloured. (85, 120, and 150 metric ton shackles are all hot dip galvanized bows and the bolts are Dimetcoted® and painted red)Sizes 3/8'' and below are mechanically galvanizedFatigue rated (1/2t - 55t)Shackles 25t and larger are RFID EQUIPPEDApproved for use at -40° C (-40 degrees F) to 204° C (400° F)Meets or exceeds all requirements of ASME B30.26Sizes 1/2 - 25t meet the performance requirements of EN13889:2003Shackles 55 metric tons and smaller can be furnished proof tested with certificate to designated standards, such as ABS, DNV, Lloyds, or other certification when requested at time of orderType Approval certification in accordance with ABS 2016 Steel Vessel Rules and 2016 ABS Guide for Certification of Lifting Appliance available. Certificates available when requested at time of order and may include additional chargesAll 2150 shackles can meet charpy requirements of 42 Joules (31 ft/lbf) avg at -20° C (-4° F) upon special requestLook for the Red Pin® . . . the mark of genuine Crosby quality.
Capacities 1/2 to 85 metric tons, grade 6Working Load Limit and grade '6' permanently shown on every shackleForged — Quenched and Tempered, with alloy pinsHot Dip galvanized or self coloured. (85, 120, and 150 metric ton shackles are all hot dip galvanized bows and the bolts are Dimetcoted® and painted red)Sizes 3/8'' and below are mechanically galvanizedFatigue rated (1/2t - 55t)Shackles 25t and larger are RFID EQUIPPEDApproved for use at -40° C (-40 degrees F) to 204° C (400° F)Meets or exceeds all requirements of ASME B30.26Sizes 1/2 - 25t meet the performance requirements of EN13889:2003Shackles 55 metric tons and smaller can be furnished proof tested with certificate to designated standards, such as ABS, DNV, Lloyds, or other certification when requested at time of orderType Approval certification in accordance with ABS 2016 Steel Vessel Rules and 2016 ABS Guide for Certification of Lifting Appliance available. Certificates available when requested at time of order and may include additional chargesAll 2150 shackles can meet charpy requirements of 42 Joules (31 ft/lbf) avg at -20° C (-4° F) upon special requestLook for the Red Pin® . . . the mark of genuine Crosby quality.
Capacities 1/2 to 85 metric tons, grade 6Working Load Limit and grade '6' permanently shown on every shackleForged — Quenched and Tempered, with alloy pinsHot Dip galvanized or self coloured. (85, 120, and 150 metric ton shackles are all hot dip galvanized bows and the bolts are Dimetcoted® and painted red)Sizes 3/8'' and below are mechanically galvanizedFatigue rated (1/2t - 55t)Shackles 25t and larger are RFID EQUIPPEDApproved for use at -40° C (-40 degrees F) to 204° C (400° F)Meets or exceeds all requirements of ASME B30.26Sizes 1/2 - 25t meet the performance requirements of EN13889:2003Shackles 55 metric tons and smaller can be furnished proof tested with certificate to designated standards, such as ABS, DNV, Lloyds, or other certification when requested at time of orderType Approval certification in accordance with ABS 2016 Steel Vessel Rules and 2016 ABS Guide for Certification of Lifting Appliance available. Certificates available when requested at time of order and may include additional chargesAll 2150 shackles can meet charpy requirements of 42 Joules (31 ft/lbf) avg at -20° C (-4° F) upon special requestLook for the Red Pin® . . . the mark of genuine Crosby quality.
Heat treated alloy steelEnds fitted with Crosby A-330 Quenched and Tempered alloy clevis grab hookFinish – Self colouredMeets or exceeds requirements of US DOT FMCSA Part 393 Subpart I.
Heat treated alloy steelEnds fitted with Crosby A-330 Quenched and Tempered alloy clevis grab hookFinish – Self colouredMeets or exceeds requirements of US DOT FMCSA Part 393 Subpart I.
Universal - for lifting in any directionWelded alloy steel body for strength and smaller size. Forged alloy components, where requiredIndividually Proof Tested to 2 times the Working Load Limit with certificationWorking Load Limit and jaw opening permanently stamped on bodyEach product is individually serialized, with the serial number and Proof Load test date stamped on body. User manual with test certificate is included with each clampIP10 - Standard clamp for materials with a surface hardness to 363HV10 (345 HB)Full 180° turning range for material transfer, turning or movingLock open, lock closed ability with latch for pretension on material and then release of materialFor use with materials with a surface hardness to 279HV10. Only 5% minimum WLL is neededMaintenance and repair kits are availableManufactured by an ISO 9001 facilityAll sizes are RFID EQUIPPEDMinimum WLL is 5% of maximum WLL for .5t IP10 onlyMinimum WLL is 10% of maximum WLL all other IP10, IP10J, IP10S, IP10H clamps.
Universal - for lifting in any directionWelded alloy steel body for strength and smaller size. Forged alloy components, where requiredIndividually Proof Tested to 2 times the Working Load Limit with certificationWorking Load Limit and jaw opening permanently stamped on bodyEach product is individually serialized, with the serial number and Proof Load test date stamped on body. User manual with test certificate is included with each clampIP10 - Standard clamp for materials with a surface hardness to 363HV10 (345 HB)Full 180° turning range for material transfer, turning or movingLock open, lock closed ability with latch for pretension on material and then release of materialFor use with materials with a surface hardness to 279HV10. Only 5% minimum WLL is neededMaintenance and repair kits are availableManufactured by an ISO 9001 facilityAll sizes are RFID EQUIPPEDMinimum WLL is 5% of maximum WLL for .5t IP10 onlyMinimum WLL is 10% of maximum WLL all other IP10, IP10J, IP10S, IP10H clamps.
Forged alloy steel - Quenched and TemperedIndividually Proof Tested to 2 1/2 times the Working Load Limit with certification Each hook has a Product Identification Code (PIC) for material traceability ,along with the size and the name CrosbySuitable for use with Grade 100 and Grade 80 chainFatigue rated at 1-1/2 times the Working Load Limit at 20,000 cycles''Look for the Platinum Colour - Crosby Grade 100 Alloy Products.'' Hook can be tip loaded at the reduced Working Load Limit. Operator must ensure the load is retained properly in the hook.
Forged alloy steel - Quenched and TemperedIndividually Proof Tested to 2 1/2 times the Working Load Limit with certification Each hook has a Product Identification Code (PIC) for material traceability ,along with the size and the name CrosbySuitable for use with Grade 100 and Grade 80 chainFatigue rated at 1-1/2 times the Working Load Limit at 20,000 cycles''Look for the Platinum Colour - Crosby Grade 100 Alloy Products.'' Hook can be tip loaded at the reduced Working Load Limit. Operator must ensure the load is retained properly in the hook.
Forged alloy steel - Quenched and TemperedIndividually Proof Tested to 2 1/2 times the Working Load Limit with certification Each hook has a Product Identification Code (PIC) for material traceability ,along with the size and the name CrosbySuitable for use with Grade 100 and Grade 80 chainFatigue rated at 1-1/2 times the Working Load Limit at 20,000 cycles''Look for the Platinum Colour - Crosby Grade 100 Alloy Products.'' Hook can be tip loaded at the reduced Working Load Limit. Operator must ensure the load is retained properly in the hook.
Clevis shortening hook. No reduction of working load limit, thanks to supporting cradle lugs on either side of hook to prevent chain link deformation. Fulfills requirements in: EN 1677:2008 (WLL +25%), ASTM A952/A952M-02 and AS 3776:2015.
Clevis shortening hook. No reduction of working load limit, thanks to supporting cradle lugs on either side of hook to prevent chain link deformation. Fulfills requirements in: EN 1677:2008 (WLL +25%), ASTM A952/A952M-02 and AS 3776:2015.
Not for use with Berglok. No reduction of working load limit, thanks to supporting lugs on either side of hook to prevent chain link deformation. Fulfills requirements in: EN 1677:2008, ISO 8539:2009, ASTM A952/A952M-02 and AS 3776:2015.
Not for use with Berglok. No reduction of working load limit, thanks to supporting lugs on either side of hook to prevent chain link deformation. Fulfills requirements in: EN 1677:2008, ISO 8539:2009, ASTM A952/A952M-02 and AS 3776:2015.
Not for use with Berglok. No reduction of working load limit, thanks to supporting lugs on either side of hook to prevent chain link deformation. Fulfills requirements in: EN 1677:2008, ISO 8539:2009, ASTM A952/A952M-02 and AS 3776:2015.
