Aircraft Grade Aluminium Water Resistant Batteries included Tested to ANSI FL1 Standard Benefits Operates on 3 x AAA Batteries High end tactical 3 position switch (High, Low, Strobe) High power LED
Dimensions: 840 x 28 x 36mm, Lumens: 1400, IP Rating IP20, Watts: 14W, Volts: 220-240V, Colour Temperature: 4000K, Life time: 25.000 h, Switch Cycles: up to 15.000, Supplied with
Tripod stand (S.155594), supplied with x 2 Floodlights (S.155593 x 2)Light source: LED, Charging time: 4 Hours, Run timeHeight: 70mm, Width: 200mm, Depth: 225mm, Homologated: CE RoHS.
Instantly upgrade garages, closets, basements and attics without batteries, rewiring or changing the fixture. This powerful 6,000 lumen light fits in any standard household light socket and each of the adjustable LED panels can be tilted 90 degrees to direct the light exactly where you need it.LIGHT MODES:On - 6000 lumensDESIGN:90 degree adjustable LED panelsQuick and easy installationEnergy efficient - only 60W600% more light than standard 60W bulbOPERATION:Standard screw base; switch ON to activatePOWER:Mains poweredSPECS340 grams(L) 11.5cm x (W) 13cm x (H) 13cm
24 LED's, Folding hanging hook, Magnet on rear, Material: Resistant Rubber, Dimensions: 210 x 58 x 25mm, Battery operated (3 x AA Batteries - not supplied)
Inspection Lamp Ideal for use in workshop environments. •Supplied with 5m of cable and a 2 pin plug. Converter for 2 pin plug to British 3 pin plug: S.13536
Not suitable for LED tube fittings.Direct replacement for Fluorescent tubes in Electronic or Magnetic type Ballast Fluorescent fittings.Not supplied with LED Starter.This tube has adjustable, lockable end caps for precision light dispersal.
Not suitable for LED tube fittings.Direct replacement for Fluorescent tubes in Electronic or Magnetic type Ballast Fluorescent fittings.Not supplied with LED Starter.This tube has adjustable, lockable end caps for precision light dispersal.
Not suitable for LED tube fittings.Direct replacement for Fluorescent tubes in Electronic or Magnetic type Ballast Fluorescent fittings.Not supplied with LED Starter.This tube has adjustable, lockable end caps for precision light dispersal.
For direct use with LED tube fittings (without Driver).This tube can be used in fluorescent fittings if.The Electronic Ballast wiring is changed to bypass the Ballast so it can be removedThe Magnetic Ballast wiring is changed to bypass the Ballast so it can be removed and an LED Starter is usedAny wiring changes to a fitting must to be done by a qualified electricianThis item is not supplied with an LED Starter
For direct use with LED tube fittings (without Driver).This tube can be used in fluorescent fittings if.The Electronic Ballast wiring is changed to bypass the Ballast so it can be removedThe Magnetic Ballast wiring is changed to bypass the Ballast so it can be removed and an LED Starter is usedAny wiring changes to a fitting must to be done by a qualified electricianThis item is not supplied with an LED Starter
For direct use with LED tube fittings (without Driver).This tube can be used in fluorescent fittings if.The Electronic Ballast wiring is changed to bypass the Ballast so it can be removedThe Magnetic Ballast wiring is changed to bypass the Ballast so it can be removed and an LED Starter is usedAny wiring changes to a fitting must to be done by a qualified electricianThis item is not supplied with an LED Starter
For direct use with LED tube fittings (without Driver).This tube can be used in fluorescent fittings if.The Electronic Ballast wiring is changed to bypass the Ballast so it can be removedThe Magnetic Ballast wiring is changed to bypass the Ballast so it can be removed and an LED Starter is usedAny wiring changes to a fitting must to be done by a qualified electricianThis item is not supplied with an LED Starter
For direct use with LED tube fittings (without Driver).This tube can be used in fluorescent fittings if.The Electronic Ballast wiring is changed to bypass the Ballast so it can be removedThe Magnetic Ballast wiring is changed to bypass the Ballast so it can be removed and an LED Starter is usedAny wiring changes to a fitting must to be done by a qualified electricianThis item is not supplied with an LED Starter
For direct use with LED tube fittings (without Driver).This tube can be used in fluorescent fittings if.The Electronic Ballast wiring is changed to bypass the Ballast so it can be removedThe Magnetic Ballast wiring is changed to bypass the Ballast so it can be removed and an LED Starter is usedAny wiring changes to a fitting must to be done by a qualified electricianThis item is not supplied with an LED Starter
The Sparex LED Rechargeable Inspection Lamp Kit covers all your workshop needs and comes in a durable carry case.Perfect for workshops, mechanics and everyday use.The kit consists of 6 rechargeable LED inspection lights for various uses.Flood light for workshop floor, narrow space between engine, axle & transmission or Ultra-valet UV leaking inspection.Durable, presentable and professional quality.One carry case contains all your mechanical and workshop lighting requirements
IP Rating: IP65Supplied with: Flush Mount Brackets and Suspension CablesNot supplied with LED Tubes.Sold Individually.Not Suitable for T12 LED Tubes.Suitable for Internal Driver LED Tubes only.
IP Rating: IP65Supplied with: Flush Mount Brackets and Suspension CablesNot supplied with LED Tubes.Sold Individually.Not Suitable for T12 LED Tubes.Suitable for Internal Driver LED Tubes only.
IP Rating: IP65Supplied with: Flush Mount Brackets and Suspension CablesNot supplied with LED Tubes.Sold Individually.Not Suitable for T12 LED Tubes.Suitable for Internal Driver LED Tubes only.
IP Rating: IP65Supplied with: Flush Mount Brackets and Suspension CablesNot supplied with LED Tubes.Sold Individually.Not Suitable for T12 LED Tubes.Suitable for Internal Driver LED Tubes only.
IP Rating: IP65Supplied with: Flush Mount Brackets and Suspension CablesNot supplied with LED Tubes.Sold Individually.Not Suitable for T12 LED Tubes.Suitable for Internal Driver LED Tubes only.
IP Rating: IP65Supplied with: Flush Mount Brackets and Suspension CablesNot supplied with LED Tubes.Sold Individually.Not Suitable for T12 LED Tubes.Suitable for Internal Driver LED Tubes only.
The Big Larry™ 2 outputs 500 lumens with the COB work light and 200 lumens from the top flashlight.The red COB light is perfect for distress signaling or roadside emergencies. The steel clip and magnetic base provide convenient hands-free lighting options.Flash Light - 200 lumens, 8 hour runtime, 75 meter beamC.O.B Work Light - 500 lumens, 2.5 hour runtime, 31 meter beamRed C.O.B Work Light - 40 lumens, 20 hour runtime, 7 meter beamTop-positioned ON/OFF button (hold to dim)Fully dimmableDirect-to-red featureMemory power settingAnodised aircraft grade aluminium; water and impact resistantSteel belt/pocket clipPowerful magnetic basePowered by 3 AA batteries (included)Height: 197mmWidth: 25mmDiameter: 32mm
The NEBO CRYKET is a versatile 3-in-1 LED light, featuring a 240 lumen C•O•B work light, a bright 250 lumen spot light and an intense red lightIts unique swivel design allows the light’s head to rotate into a forward-facing light, perfect for various working conditions. The magnetic base and steel clip provide convenient hands-free lighting.White Spot Light - 250 lumens, 3.5 hours runtime, 113 meter beam Flood Light - 240 lumens, 2.75 hours runtime, 21 meter beam Red Light - 15 lumens, 6.5 hours runtime, 6 meter beam Fully dimmable (spot light & flood light)Anodized aircraft-grade aluminum; water and impact-resistant90º swivel headPower memory settingDirect-to-red featureSteel belt/pocket clipPowerful magnetic baseRubberized non-slip gripPowered by 4 AAA batteries includedEuro slot display pack MOQ 4